Navi Mumbai Scrap Covers Navi Mumbai WhatsApp Us Now

Builders: Selling Site Scrap Without Losing Value

Navi Mumbai Scrap · Updated 2026-10-10

Builders lose value on site scrap through mixing, theft, rust and unrecorded lifts. The fix is simple: segregated bays for TMT offcuts, MS, non-ferrous and packaging, a fixed lift schedule, and a numbered receipt for every truck. Navi Mumbai Scrap buys metal and fit-out scrap from construction sites across Navi Mumbai. We do not take malba or construction debris.

Short answer: Builders lose value on site scrap through mixing, theft, rust and unrecorded lifts. The fix is simple: segregated bays for TMT offcuts, MS, non-ferrous and packaging, a fixed lift schedule, and a numbered receipt for every truck. Navi Mumbai Scrap buys metal and fit-out scrap from construction sites across Navi Mumbai. We do not take malba or construction debris.

Where the value goes on a typical site

A residential project in Kharghar, Ulwe or a Vashi redevelopment generates steady scrap over two to four years. Most builders know it is worth something. Few know how much leaks away. The usual causes:

  • TMT offcuts and binding wire dumped in the same heap as debris.
  • Copper cable offcuts left in the open where they walk off the site.
  • Steel left exposed through a monsoon, losing weight and grade to rust.
  • Different contractors selling small lots to whoever comes past, with no record.

What site scrap actually is

Material Where it comes from
TMT offcuts, binding wire Bar bending yard
MS pipes, angles, damaged scaffolding Staging, temporary works
Damaged shuttering plates, props Formwork
Copper and aluminium cable offcuts Electrical contractor
Aluminium and uPVC offcuts Window and facade contractor
Cartons, wooden crates, film Fitting and fixture deliveries
Labour camp sheds and fittings End of project

Most of the value sits in the first five rows. Packaging and crates matter mainly because clearing them keeps the site tidy and safe. What we do not take: malba, broken concrete, bricks, tiles, cement bags with residue, and any hazardous chemicals or admixture containers.

Who owns which scrap

Before any sale, settle ownership in writing. Steel supplied by the builder belongs to the builder, even when a labour contractor cuts it. Scaffolding and shuttering may belong to a hire company. Cable offcuts may belong to the electrical contractor under their contract. We buy only from the party who owns the material, and the receipt names them. This one step prevents most site disputes.

Set up segregated bays

  1. Mark a fenced bay near the bar bending yard for TMT offcuts and binding wire.
  2. Keep a lockable store or cage for copper, brass and aluminium.
  3. Stack MS pipes and sections on sleepers, off the ground, under cover if possible.
  4. Keep packaging in a separate dry corner.
  5. Put one supervisor in charge of the bays and the lift register.

Segregated material prices higher because each grade is weighed at its own rate. Indicative ranges are on our scrap rate page, with separate lines for copper wire.

Run a lift schedule, not ad hoc sales

On active sites we suggest a fixed lift, fortnightly or monthly, timed to the slab cycle. Each lift is weighed on site with a digital scale in front of the site supervisor or, for full trucks, on a weighbridge with the slip attached. Every lift gets a numbered receipt: material, weight, rate basis and payment mode. The site office keeps one register, and the project accounts team can reconcile it against steel consumption.

Site rules we follow

  • Crew and vehicle details sent to site security in advance.
  • Helmets, safety shoes and any project-specific PPE worn inside the site.
  • Lifts timed to avoid concrete pours and crane operations.
  • No entry beyond the scrap bays without the supervisor.

Redevelopment sites: before the old building comes down

On redevelopment projects in Vashi, Nerul and Sanpada, there is value in the old building before demolition: aluminium windows, grills, water tanks, pumps, lift machinery and electrical panels. Agree with the society which fittings members take and which pass to the developer. Our page for redevelopment societies covers the member side.

End of project clearance

At completion, labour camps, site offices, stores and leftover materials need to go. We clear these as one net figure: metal sheds, steel and fittings on the value side, labour and disposal of non-scrap items on the cost side.

Leftover new material is a separate question. Unused TMT bars, full cable drums and boxed fittings are often worth more transferred to your next project or returned to the supplier than sold as scrap. Check those options first, and send us only what is genuinely surplus or damaged. Site office containers, porta cabins and sheet metal stores are priced on their steel after inspection.

A simple monthly register for the site office

Column What to record
Date and receipt number From our numbered receipt
Material TMT offcuts, MS, copper cable, aluminium, packaging
Weight or lot Scale reading or weighbridge slip
Owner Builder or named contractor
Payment Mode and account
Supervisor sign-off Name of the person who witnessed weighing

Project accounts can compare TMT offcut weight against steel issued each month. A sudden drop in offcuts usually means scrap is leaving the site some other way.

Why steel offcuts are worth tracking

On a mid-size tower, steel is one of the largest material costs, and some wastage at the bar bending yard is unavoidable. Selling that wastage properly does not change the project's economics on its own. But a clean record of offcuts, sold and paid into the company account, helps purchase teams check cutting efficiency and closes a common route for pilferage. It is a control as much as an income line. Auditors and project directors tend to ask about it only when something looks wrong, and a monthly register with receipts answers the question in minutes.

Talk to your site team

Project managers and purchase heads can WhatsApp 9594999512 with the site location and a photo of the current scrap stack. See our construction scrap page and the full service for builders. We work active sites in Kharghar, Ulwe, Panvel and every redeveloping node.

Scrap and clearance for builders & contractors

Frequently asked questions

Do you take construction debris or malba?

No. Debris, broken concrete, bricks and tiles need a separate debris contractor.

Can payment go to the company account with a receipt per lift?

Yes. Every lift gets a numbered receipt and payment is made to the account named by the builder.

Can you work with our purchase order and payment terms?

Yes, for recurring lifts on a long project we work against a purchase order with agreed terms.

Do you buy hired scaffolding?

Only with written confirmation from the hire company that owns it.

Can you lift on Sundays when the site is quiet?

Yes. Many sites prefer Sunday or early morning lifts so trucks do not clash with concrete deliveries and crane work.

Got scrap? We will be there today.

Airoli to Ulwe. Homes, societies, offices and MIDC.

WhatsApp Us NowCall