Factory Shed Clearance in Taloja: How the Net Figure Is Worked Out
For a factory shed clearance in Taloja MIDC, Navi Mumbai Scrap gives one net figure: the scrap value of metal, machines and fittings, minus labour, cutting, lifting, transport and disposal of items with no value. If the shed holds plenty of steel and machinery, we usually pay. If it is mostly packaging, wood and junk, a clearance charge may apply. You know the number before work starts.
Short answer: For a factory shed clearance in Taloja MIDC, Navi Mumbai Scrap gives one net figure: the scrap value of metal, machines and fittings, minus labour, cutting, lifting, transport and disposal of items with no value. If the shed holds plenty of steel and machinery, we usually pay. If it is mostly packaging, wood and junk, a clearance charge may apply. You know the number before work starts.
The question every unit owner asks
When a unit in Taloja shuts down, shifts or changes tenant, the owner wants to know one thing: will the clearance cost money or bring money in? The honest answer depends on what is inside. This post shows how we work that out, so you can judge any quote you receive, ours included.
Step 1: the inspection
We visit the shed or review a detailed walkthrough video. We note every material group and estimate weights: structural steel, sheeting, racks, machines, motors, panels, cabling, furniture, packaging, wood. We also note how the shed is built, how close a truck can get, whether a crane or hydra is needed, and what the landlord or MIDC plot owner wants left behind.
Step 2: the value side
- Ferrous metal: racks, structurals, machine bodies, tanks. Usually the bulk of the weight.
- Non-ferrous metal: copper in motors, panels and cabling; aluminium sections; brass fittings; stainless steel equipment.
- Units with resale or part value: some machines and motors are worth more as working units than as metal.
Each group is valued at the indicative range for that month. Copper and stainless carry the most value per kilo, so a shed with heavy electrical fit-out moves the figure a lot. Ranges are on our scrap rate page.
Step 3: the cost side
- Labour: crew size and number of days.
- Dismantling and cutting: gas cutting of structures, machine dismantling, cable pulling.
- Lifting: crane or hydra hire for heavy machines.
- Transport: number of truck trips out of the estate.
- Disposal: wood, broken furniture, packaging and general junk that has no scrap value but still has to leave the site.
Step 4: one number
Value minus cost gives the net figure. If the result is positive, we pay that amount. If it is negative, that is the clearance charge after the scrap value has already been offset. The figure is written into a short scope note listing what is included and what is not, and it does not change after work starts unless you add items.
What moves the figure, in practice
| Shed contents | Likely outcome |
|---|---|
| Heavy racking, machines, motors, panels | We pay |
| Mixed metal and packaging, easy truck access | Usually we pay, smaller amount |
| Mostly wood, cartons, broken furniture | Clearance charge likely |
| Heavy machines needing crane, little else | Depends on machine weight and grade |
These are patterns, not promises. Every shed gets its own figure.
What is outside scope
We do not handle process chemicals, sludge, used oil, contaminated drums or anything your unit classifies as hazardous. Asbestos cement roofing, still found on some older sheds, is not touched. Civil debris and malba from breaking floors or walls is not accepted. These need separate specialist arrangements by the owner. Our scope note lists these exclusions so there is no confusion on the day.
A short checklist before the visit
- Get written confirmation from the landlord or plot owner on what must be removed.
- Arrange hot work permission if structures need gas cutting.
- Remove documents, records and anything you are keeping.
- Isolate power to panels and machines that will be removed.
- Share the handover date so we plan crew and trucks to it.
Taloja-specific points
Taloja MIDC plots vary a lot in internal road width and truck access, and some lanes are crowded with trailers during the day. We often schedule heavy lifts early morning or on Sundays. Units in the residential edge of Taloja Phase 1 and Phase 2 have different access rules from plots deep inside the estate. Tell us the plot location when you book.
How to compare two quotes fairly
Unit owners often get two or three clearance quotes that look impossible to compare. One vendor offers a high number but excludes cutting and disposal. Another quotes lower but includes everything. To compare them honestly, ask every vendor the same questions:
- Is this a net figure, or will labour and transport be charged separately?
- Does it include removing wood, packaging and general junk, or only the metal?
- Who arranges and pays for the crane or hydra?
- Is the shed left swept and empty, or only stripped of metal?
- Will the figure change if the weight turns out different from the estimate?
- Is there a written scope note listing exclusions?
A high offer that leaves half the shed behind is not a better offer. The landlord will still want the space empty, and you will pay someone else to finish it. Compare on the same scope, and the real difference between quotes usually becomes clear within a few minutes. If a vendor will not put the scope in writing, treat the number as a starting point for haggling, not a firm price.
Ask for your net figure
WhatsApp 9594999512 with a walkthrough video and the plot number. Local details are on our Taloja MIDC page and our Taloja metal scrap page. The wider service is on factory shed clearance, and how scrap pricing works explains our method in full.
Factory Shed Clearance in Navi Mumbai
Frequently asked questions
Can the net figure change on the day?
Only if items are added that were not in the scope note. The agreed figure for the agreed scope does not change after work starts.
Do you pay before or after the clearance?
For jobs where we pay, payment is made as agreed in the scope note, usually on completion of loading or per truck lift with a receipt.
Can you sell working machines separately?
Tell us which machines are working. Some are valued as units rather than metal, which can improve the figure.
How long does a typical shed clearance take?
Small sheds can be cleared in a day. Large plots with heavy structures can take several days, set out in the scope note.
Do you give a receipt for each truck leaving the plot?
Yes. Every truck lift gets a numbered receipt and material handover note, which the MIDC gate and your accounts team can both use.