Scrap Dealer Near Me: Should You Sell by Weight or Lumpsum?
Sell by weight when your scrap is loose, sorted and made of one material, like raddi, copper wire, utensils or iron pieces. Accept a lumpsum when items are bulky, mixed or need dismantling, like furniture, appliances or a full loft. Navi Mumbai Scrap uses both, and either way the number is agreed before loading and does not change after.
Short answer: Sell by weight when your scrap is loose, sorted and made of one material, like raddi, copper wire, utensils or iron pieces. Accept a lumpsum when items are bulky, mixed or need dismantling, like furniture, appliances or a full loft. Navi Mumbai Scrap uses both, and either way the number is agreed before loading and does not change after.
A decision, not a debate
Our earlier post on weighing tricks and lumpsum lowballing covered how sellers get cheated. This one is the step before: when should you even ask for weighing, and when is a lumpsum the fairer, faster choice? Both methods are honest when done in the open. Each one fits different scrap. Choosing the right one for each item is the single easiest way to get a fair total, and it takes about five minutes of thought before you send the photo.
When weight is clearly better
- Raddi and cardboard. Uniform material, easy to bundle and weigh.
- Copper and brass. High value per kilo, so every kilo should be counted. Keep tamba wire, pital fittings and copper pipe in separate bags.
- Aluminium. Window frames, utensils, cans. Easy to weigh and worth much more than iron.
- Iron and steel pieces. Grills, pipes, rods, sheets.
- Batteries. Inverter and UPS batteries are priced by weight.
The rule: if it can go on a scale in one or two trips and is one material, weigh it. Indicative ranges are on our scrap rate page.
When a lumpsum makes more sense
- Furniture. A steel almirah has to be dismantled to weigh. A lumpsum skips that.
- Appliances. A fridge's value is in the compressor and copper, not its total weight, so per-unit pricing is fairer than kilos.
- Mixed lots. A loft with paper, plastic, a broken fan and three bags of odds and ends would take an hour to sort and weigh.
- Full rooms and clearances. These include labour and disposal, so they need one net figure, not a weight.
The smart hybrid
Most household lots are best handled as a mix. Pull out the high-value metals, copper wire, brass, aluminium and any heavy iron, and have them weighed. Let the furniture, appliances and leftover mixed items go as a lumpsum. You get the precision of weighing where it matters most and the speed of a lumpsum for the rest.
Sorting is what makes the hybrid work. A mixed bag of metal odds and ends is a lumpsum. The same bag split into copper, brass, aluminium and iron is four weighings, each at its own rate. Ten minutes with a magnet and four bags usually pays well, and it takes the guesswork out of the conversation at your door.
Decision table
| What you are selling | Best method |
|---|---|
| Newspaper and cartons | Weight |
| Copper wire, brass taps, aluminium frames | Weight, separate bags |
| Utensils | Weight, steel apart from brass and copper |
| Split or window AC, fridge, washing machine | Per unit |
| Almirah, bed, office furniture | Lumpsum |
| Loft full of mixed items | Lumpsum, after pulling out metals |
| Whole flat or shop | One net clearance figure |
How to judge a lumpsum offer
A lumpsum is only as fair as the information behind it. To judge one:
- Check the indicative ranges for the main items before the visit.
- Make sure the buyer has seen everything, including the back of the loft.
- Ask what the lumpsum is based on, for example the almirah and the two coolers.
- Agree the number before anything is lifted.
- Do not accept a lumpsum that is lowered after loading.
- If two buyers quote very differently, ask each what they counted.
How to judge a weighing
- The scale should be digital and readable by you.
- It should show zero before each load.
- Each material should be weighed separately.
- The total should be written or shown before payment.
If you cannot read the display, or the crew weighs everything in one go, ask them to stop and redo it. Our page on how scrap pricing works explains the method in more detail.
What happens with Navi Mumbai Scrap
Loose metal, raddi, copper, e-waste and batteries are weighed in front of you on a digital scale. Furniture, appliances, mixed lots and full rooms usually get one lumpsum agreed before loading. The number never changes after loading, and you are paid by cash or UPI before the crew leaves.
Three household examples
A Nerul flat clearing the loft: two bundles of raddi, a bag of old copper wire, some aluminium utensils, a broken table fan and a cooler. Best handled as weight for the raddi, copper and aluminium, and a small lumpsum for the fan and cooler.
A Kharghar family replacing appliances: an old split AC and a single-door fridge. Per-unit pricing for both, based on photos sent in advance.
A Panvel bungalow after renovation: old grills, a heap of iron pipe, aluminium window frames and a wooden wardrobe. Weigh the iron and aluminium separately, lumpsum the wardrobe or clear it if it has no value.
What to tell the buyer before the visit
- Which items you want weighed and which you are happy to lumpsum.
- Whether metals are already sorted.
- Anything heavy that needs dismantling.
- The floor and lift situation.
A clear brief means the crew arrives with the right scale, enough people and a realistic number in mind, which keeps the conversation at your door short.
Get a price from a photo
WhatsApp 9594999512 with a photo and say which items you want weighed. We cover every node, including Kopar Khairane and Kamothe.
Frequently asked questions
Can I insist on weighing everything?
You can ask. For bulky furniture and appliances, weighing is slower and rarely gets you more, but loose metal should always be weighed if you want it.
Why are ACs priced per unit and not by weight?
Because most of their value is in specific parts, the compressor and copper coil, not in total weight.
Is a lumpsum always lower?
No. For bulky or mixed items, a fair lumpsum is often equal to or better than a slow, piece-by-piece weighing.
Can the lumpsum change after you see the items?
It is confirmed once the crew sees everything, before loading. After loading it does not change.
Do you weigh small lots too?
Yes. Even a few kilos of raddi or copper wire is weighed in front of you.